“Adjust-A-Plate” install (plate extra).....$80.00

Bead install, front or center (bead extra).....$25.00

Bead removal if stuck.....$10.00-$20.00

Browning A-5,  2 3/4" conversion........$95.00

Buttpad install (standard).....$65.00

----Curved or Notched Buttplate.....$75.00-$125.00

     Fit 1/4” Spacers  (per spacer).....$25.00

     Fit 1” Spacers (per spacer) No Pad work.....$40.00

Cantilever mount install, touch-up blue.....$150.00 (includes parts)

   ---Remove old sights if necessary.....$15.00

Choke opening (per barrel).....$65.00 ($20 extra for chrome bore)

Choke tube on single barrel 10ga.....$99.50.....($20 extra for chrome bore)

   ---Spare choke tubes 10ga.....$24.99

Choke tube install - double barrel (includes 5 tubes).....$475.00

Choke tube install on single barrel 12/20ga.....$79.50

Choke tube TRU-CHOKE package install (includes: Full, Mod, I.C. tubes and wrench.....$129.99

Choke tube removal....(usually ruins choke tube)(may ruin barrel).....$60.00

Clean, oil and test doubles..........$80.00-$100.00

Clean, oil and test pumps/autos..........$55.00-$75.00

Convert barrel to “Deerslayer” or “Buck Special”.....$60.00 plus sights

Convert to 3” magnum.....$90.00

Cowboy Action Job--Win 97’s.....$100.00

Cowboy Action Jobs--Doubles.....$80.00

Cut/Crown single barrel and re-install bead.....$50.00

Cut/Crown double barrel and re-install bead.....$80.00

Dent removal (at customer’s risk).....$50.00-$70.00

Drill/Tap/Install Base on Receiver.....$65.00

Edwards recoil reducer install (labor only).....$50.00

Forcing cone lengthening.....$55.00

Gold plate trigger on most shotguns.....$45.00

Gold fill receiver engraving on most shotguns with engraving.....$40.00

Jewel (engine turn) bolt and carrier on most shotguns.....$45.00

Left-hand safety install (most models) (price of safety extra).....$25.00 and up

Mercury reducer install.....$65.00 (reducer extra)

Mount scope/bore-site on existing base.....$25.00

Pattern Shotgun.....$50.00

Personal fitting to customers shotgun.....$40.00

----Customer needs to come into store with shotgun and we will fit while you wait. Gun may have to stay longer if more work needs to be done.

Porting barrel.....Porting Page

Remington 1100/1187 Action tube repair/install (includes touch-up)...$60

Remington 1100/1187 Barrel stud install (includes touch-up)......$65

Remington 1100/1187 Install new int. latch stud (extra charge to remove)....$65

----remove damaged int. latch stud.....$25.00

Remington 1100/1187 Mag tube resoldering (includes touch-up)....$80

Remington 1100/1187 New mag tube install (includes touch-up)....$110

Remington 1100/1187 Solder new barrel support......$80

Remington 870 Conversion to 3"........$90

Remington 870 Ejector Install......$60

Remington 58 Conversion of 870 barrel......$85

Rib repair.................$150-$200.

Saddle mount install for scope.....$25.00

----custom mounts for LH dominant eye.....P.O.R.

Simmons vent rib........POR

Slug sight installation.......$70 (per sight, solder-on)

Straighten barrel.......$40-$60

Swivel set installation.......$30

Trigger job..........$65

Winchester 12, 2 3/4" conversion.........$85

 

 

 

©AHLMAN'S GUNS • 9525 W 230TH ST • MORRISTOWN, MN 55052

 

507-685-4243 / 507-685-4244 • FAX: 507-685-4280

Additional Gunsmith Services

“Adjust-A-Plate” install (plate extra).....$80.00

Bead install, front or center (bead extra).....$25.00

Bead removal if stuck.....$10.00-$20.00

Browning A-5,  2 3/4" conversion........$95.00

Buttpad install (standard).....$65.00

----Curved or Notched Buttplate.....$75.00-$125.00

     Fit 1/4” Spacers  (per spacer).....$25.00

     Fit 1” Spacers (per spacer) No Pad work.....$40.00

Cantilever mount install, touch-up blue.....$150.00 (includes parts)

   ---Remove old sights if necessary.....$15.00

Choke opening (per barrel).....$65.00 ($20 extra for chrome bore)

Choke tube on single barrel 10ga.....$99.50.....($20 extra for chrome bore)

   ---Spare choke tubes 10ga.....$24.99

Choke tube install - double barrel (includes 5 tubes).....$475.00

Choke tube install on single barrel 12/20ga.....$79.50

Choke tube TRU-CHOKE package install (includes: Full, Mod, I.C. tubes and wrench.....$129.99

Choke tube removal....(usually ruins choke tube)(may ruin barrel).....$60.00

Clean, oil and test doubles..........$80.00-$100.00

Clean, oil and test pumps/autos..........$55.00-$75.00

Convert barrel to “Deerslayer” or “Buck Special”.....$60.00 plus sights

Convert to 3” magnum.....$90.00

Cowboy Action Job--Win 97’s.....$100.00

Cowboy Action Jobs--Doubles.....$80.00

Cut/Crown single barrel and re-install bead.....$50.00

Cut/Crown double barrel and re-install bead.....$80.00

Dent removal (at customer’s risk).....$50.00-$70.00

Drill/Tap/Install Base on Receiver.....$65.00

Edwards recoil reducer install (labor only).....$50.00

Forcing cone lengthening.....$55.00

Gold plate trigger on most shotguns.....$45.00

Gold fill receiver engraving on most shotguns with engraving.....$40.00

Jewel (engine turn) bolt and carrier on most shotguns.....$45.00

Left-hand safety install (most models) (price of safety extra).....$25.00 and up

Mercury reducer install.....$65.00 (reducer extra)

Mount scope/bore-site on existing base.....$25.00

Pattern Shotgun.....$50.00

Personal fitting to customers shotgun.....$40.00

----Customer needs to come into store with shotgun and we will fit while you wait. Gun may have to stay

     longer if more work needs to be done.

Porting barrel.....Porting Page

Remington 1100/1187 Action tube repair/install (includes touch-up)...$60

Remington 1100/1187 Barrel stud install (includes touch-up)......$65

Remington 1100/1187 Install new int. latch stud (extra charge to remove)....$65

----remove damaged int. latch stud.....$25.00

Remington 1100/1187 Mag tube resoldering (includes touch-up)....$80

Remington 1100/1187 New mag tube install (includes touch-up)....$110

Remington 1100/1187 Solder new barrel support......$80

Remington 870 Conversion to 3"........$90

Remington 870 Ejector Install......$60

Remington 58 Conversion of 870 barrel......$85

Rib repair.................$150-$200.

Saddle mount install for scope.....$25.00

----custom mounts for LH dominant eye.....P.O.R.

Simmons vent rib........POR

Slug sight installation.......$70 (per sight, solder-on)

Straighten barrel.......$40-$60

Swivel set installation.......$30

Trigger job..........$65

Winchester 12, 2 3/4" conversion.........$85

 

 

Additional Gunsmith Services

Additional Gunsmith Services

“Adjust-A-Plate” install (plate extra).....$80.00

Bead install, front or center (bead extra).....$25.00

Bead removal if stuck.....$10.00-$20.00

Browning A-5,  2 3/4" conversion........$95.00

Buttpad install (standard).....$65.00

----Curved or Notched Buttplate.....$75.00-$125.00

     Fit 1/4” Spacers  (per spacer).....$25.00

     Fit 1” Spacers (per spacer) No Pad work.....$40.00

Cantilever mount install, touch-up blue.....$150.00 (includes parts)

   ---Remove old sights if necessary.....$15.00

Choke opening (per barrel).....$65.00 ($20 extra for chrome bore)

Choke tube on single barrel 10ga.....$99.50.....($20 extra for chrome bore)

   ---Spare choke tubes 10ga.....$24.99

Choke tube install - double barrel (includes 5 tubes).....$475.00

Choke tube install on single barrel 12/20ga.....$79.50

Choke tube TRU-CHOKE package install (includes: Full, Mod, I.C. tubes and wrench.....$129.99

Choke tube removal....(usually ruins choke tube)(may ruin barrel).....$60.00

Clean, oil and test doubles..........$80.00-$100.00

Clean, oil and test pumps/autos..........$55.00-$75.00

Convert barrel to “Deerslayer” or “Buck Special”.....$60.00 plus sights

Convert to 3” magnum.....$90.00

Cowboy Action Job--Win 97’s.....$100.00

Cowboy Action Jobs--Doubles.....$80.00

Cut/Crown single barrel and re-install bead.....$50.00

Cut/Crown double barrel and re-install bead.....$80.00

Dent removal (at customer’s risk).....$50.00-$70.00

Drill/Tap/Install Base on Receiver.....$65.00

Edwards recoil reducer install (labor only).....$50.00

Forcing cone lengthening.....$55.00

Gold plate trigger on most shotguns.....$45.00

Gold fill receiver engraving on most shotguns with engraving.....$40.00

Jewel (engine turn) bolt and carrier on most shotguns.....$45.00

Left-hand safety install (most models) (price of safety extra).....$25.00 and up

Mercury reducer install.....$65.00 (reducer extra)

Mount scope/bore-site on existing base.....$25.00

Pattern Shotgun.....$50.00

Personal fitting to customers shotgun.....$40.00

----Customer needs to come into store with shotgun and we will fit while you wait. Gun may

     have to stay longer if more work needs to be done.

Porting barrel.....Porting Page

Remington 1100/1187 Action tube repair/install (includes touch-up)...$60

Remington 1100/1187 Barrel stud install (includes touch-up)......$65

Remington 1100/1187 Install new int. latch stud (extra charge to remove)....$65

----remove damaged int. latch stud.....$25.00

Remington 1100/1187 Mag tube resoldering (includes touch-up)....$80

Remington 1100/1187 New mag tube install (includes touch-up)....$110

Remington 1100/1187 Solder new barrel support......$80

Remington 870 Conversion to 3"........$90

Remington 870 Ejector Install......$60

Remington 58 Conversion of 870 barrel......$85

Rib repair.................$150-$200.

Saddle mount install for scope.....$25.00

----custom mounts for LH dominant eye.....P.O.R.

Simmons vent rib........POR

Slug sight installation.......$70 (per sight, solder-on)

Straighten barrel.......$40-$60

Swivel set installation.......$30

Trigger job..........$65

Winchester 12, 2 3/4" conversion.........$85

 

 

“Adjust-A-Plate” install (plate extra).....$80.00

Bead install, front or center (bead extra).....$25.00

Bead removal if stuck.....$10.00-$20.00

Browning A-5,  2 3/4" conversion........$95.00

Buttpad install (standard).....$65.00

----Curved or Notched Buttplate.....$75.00-$125.00

     Fit 1/4” Spacers  (per spacer).....$25.00

     Fit 1” Spacers (per spacer) No Pad work.....$40.00

Cantilever mount install, touch-up blue.....$150.00 (includes parts)

   ---Remove old sights if necessary.....$15.00

Choke opening (per barrel).....$65.00 ($20 extra for chrome bore)

Choke tube on single barrel 10ga.....$99.50.....($20 extra for chrome bore)

   ---Spare choke tubes 10ga.....$24.99

Choke tube install - double barrel (includes 5 tubes).....$475.00

Choke tube install on single barrel 12/20ga.....$79.50

Choke tube TRU-CHOKE package (includes: Full, Mod, I.C. tubes and wrench...$129.99

Choke tube removal....(usually ruins choke tube)(may ruin barrel).....$60.00

Clean, oil and test doubles..........$80.00-$100.00

Clean, oil and test pumps/autos..........$55.00-$75.00

Convert barrel to “Deerslayer” or “Buck Special”.....$60.00 plus sights

Convert to 3” magnum.....$90.00

Cowboy Action Job--Win 97’s.....$100.00

Cowboy Action Jobs--Doubles.....$80.00

Cut/Crown single barrel and re-install bead.....$50.00

Cut/Crown double barrel and re-install bead.....$80.00

Dent removal (at customer’s risk).....$50.00-$70.00

Drill/Tap/Install Base on Receiver.....$65.00

Edwards recoil reducer install (labor only).....$50.00

Forcing cone lengthening.....$55.00

Gold plate trigger on most shotguns.....$45.00

Gold fill receiver engraving on most shotguns with engraving.....$40.00

Jewel (engine turn) bolt and carrier on most shotguns.....$45.00

Left-hand safety install (most models) (price of safety extra).....$25.00 and up

Mercury reducer install.....$65.00 (reducer extra)

Mount scope/bore-site on existing base.....$25.00

Pattern Shotgun.....$50.00

Personal fitting to customers shotgun.....$40.00

----Customer needs to come into store with shotgun and we will fit while you wait.

     Gun may have to stay longer if more work needs to be done.

Porting barrel.....Porting Page

Remington 1100/1187 Action tube repair/install (includes touch-up)...$60

Remington 1100/1187 Barrel stud install (includes touch-up)......$65

Remington 1100/1187 Install new int. latch stud (extra charge to remove)....$65

----remove damaged int. latch stud.....$25.00

Remington 1100/1187 Mag tube resoldering (includes touch-up)....$80

Remington 1100/1187 New mag tube install (includes touch-up)....$110

Remington 1100/1187 Solder new barrel support......$80

Remington 870 Conversion to 3"........$90

Remington 870 Ejector Install......$60

Remington 58 Conversion of 870 barrel......$85

Rib repair.................$150-$200.

Saddle mount install for scope.....$25.00

----custom mounts for LH dominant eye.....P.O.R.

Simmons vent rib........POR

Slug sight installation.......$70 (per sight, solder-on)

Straighten barrel.......$40-$60

Swivel set installation.......$30

Trigger job..........$65

Winchester 12, 2 3/4" conversion.........$85

 

 

©AHLMAN'S GUNS • MORRISTOWN, MN

507-685-4243 / 507-685-4244

“Adjust-A-Plate” install (plate extra).....$80.00

Bead install, front or center (bead extra).....$25.00

Bead removal if stuck.....$10.00-$20.00

Browning A-5,  2 3/4" conversion........$95.00

Buttpad install (standard).....$65.00

----Curved or Notched Buttplate.....$75.00-$125.00

     Fit 1/4” Spacers  (per spacer).....$25.00

     Fit 1” Spacers (per spacer) No Pad work.....$40.00

Cantilever mount install, touch-up blue.....$150.00 (includes parts)

----Remove old sights if necessary.....$15.00

Choke opening (per barrel).....$65.00 ($20 extra for chrome bore)

Choke tube on single barrel 10ga...$99.50...($20 extra for chrome bore)

----Spare choke tubes 10ga.....$24.99

Choke tube install - double barrel (includes 5 tubes).....$475.00

Choke tube install on single barrel 12/20ga.....$79.50

Choke tube TRU-CHOKE package install (includes: Full, Mod, I.C. tubes

     and wrench.....$129.99

Choke tube removal....(usually ruins choke tube)(may ruin barrel)...$60

Clean, oil and test doubles..........$80.00-$100.00

Clean, oil and test pumps/autos..........$55.00-$75.00

Convert barrel to “Deerslayer” or “Buck Special”.....$60.00 plus sights

Convert to 3” magnum.....$90.00

Cowboy Action Job--Win 97’s.....$100.00

Cowboy Action Jobs--Doubles.....$80.00

Cut/Crown single barrel and re-install bead.....$50.00

Cut/Crown double barrel and re-install bead.....$80.00

Dent removal (at customer’s risk).....$50.00-$70.00

Drill/Tap/Install Base on Receiver.....$65.00

Edwards recoil reducer install (labor only).....$50.00

Forcing cone lengthening.....$55.00

Gold plate trigger on most shotguns.....$45.00

Gold fill receiver engraving on most shotguns with engraving.....$40.00

Jewel (engine turn) bolt and carrier on most shotguns.....$45.00

Left-hand safety install (most models) (price of safety extra)..$25 & up

Mercury reducer install.....$65.00 (reducer extra)

Mount scope/bore-site on existing base.....$25.00

Pattern Shotgun.....$50.00

Personal fitting to customers shotgun.....$40.00

----Customer needs to come into store with shotgun and we will fit

     while you wait. Gun may have to stay longer if more work needs to

     be done.

Porting barrel.....Porting Page

Remington 1100/1187 Action tube repair/install (includes touch-up)$60

Remington 1100/1187 Barrel stud install (includes touch-up)......$65

Remington 1100/1187 Install new int. latch stud (extra charge to

     remove)....$65

----remove damaged int. latch stud.....$25.00

Remington 1100/1187 Mag tube resoldering (includes touch-up)....$80

Remington 1100/1187 New mag tube install (includes touch-up)....$110

Remington 1100/1187 Solder new barrel support......$80

Remington 870 Conversion to 3"........$90

Remington 870 Ejector Install......$60

Remington 58 Conversion of 870 barrel......$85

Rib repair.................$150-$200.

Saddle mount install for scope.....$25.00

----custom mounts for LH dominant eye.....P.O.R.

Simmons vent rib........POR

Slug sight installation.......$70 (per sight, solder-on)

Straighten barrel.......$40-$60

Swivel set installation.......$30

Trigger job..........$65

Winchester 12, 2 3/4" conversion.........$85

 

 

“Adjust-A-Plate” install (plate extra).....$80.00

Bead install, front or center (bead extra).....$25.00

Bead removal if stuck.....$10.00-$20.00

Browning A-5,  2 3/4" conversion........$95.00

Buttpad install (standard).....$65.00

----Curved or Notched Buttplate.....$75.00-$125.00

     Fit 1/4” Spacers  (per spacer).....$25.00

     Fit 1” Spacers (per spacer) No Pad work.....$40.00

Cantilever mount install, touch-up blue.....$150.00

     (includes parts)

      ---Remove old sights if necessary.....$15.00

Choke opening (per barrel).....$65.00 ($20 extra for

      chrome bore)

Choke tube on single barrel 10ga.....$99.50.....($20

      extra for chrome bore)

      ---Spare choke tubes 10ga.....$24.99

Choke tube install - double barrel (includes 5

      tubes).....$475.00

Choke tube install on single barrel 12/20ga.....$79.50

Choke tube TRU-CHOKE package install (includes: Full, Mod, I.C. tubes and wrench.....$129.99

Choke tube removal....(usually ruins choke tube)

     (may ruin barrel).....$60.00

Clean, oil and test doubles..........$80.00-$100.00

Clean, oil and test pumps/autos..........$55-$75

Convert barrel to “Deerslayer” or “Buck Special”.....

      $60.00 plus sights

Convert to 3” magnum.....$90.00

Cowboy Action Job--Win 97’s.....$100.00

Cowboy Action Jobs--Doubles.....$80.00

Cut/Crown single barrel and re-install bead.....$50

Cut/Crown double barrel and re-install bead.....$80

Dent removal (at customer’s risk).....$50.00-$70.00

Drill/Tap/Install Base on Receiver.....$65.00

Edwards recoil reducer install (labor only).....$50.00

Forcing cone lengthening.....$55.00

Gold plate trigger on most shotguns.....$45.00

Gold fill receiver engraving on most shotguns with

     engraving.....$40.00

Jewel (engine turn) bolt and carrier on most

     shotguns.....$45.00

Left-hand safety install (most models) (price of

     safety extra).....$25.00 and up

Mercury reducer install.....$65.00 (reducer extra)

Mount scope/bore-site on existing base.....$25.00

Pattern Shotgun.....$50.00

Personal fitting to customers shotgun.....$40.00

----Customer needs to come into store with shotgun

     and we will fit while you wait. Gun may have to

     stay longer if more work needs to be done.

Porting barrel.....Porting Page

Remington 1100/1187 Action tube repair/install

     (includes touch-up)...$60

Remington 1100/1187 Barrel stud install (includes

     touch-up)......$65

Remington 1100/1187 Install new int. latch stud

     (extra charge to remove)....$65

----remove damaged int. latch stud.....$25.00

Remington 1100/1187 Mag tube resoldering (includes

     touch-up)....$80

Remington 1100/1187 New mag tube install (includes

     touch-up)....$110

Remington 1100/1187 Solder new barrel support.$80

Remington 870 Conversion to 3"........$90

Remington 870 Ejector Install......$60

Remington 58 Conversion of 870 barrel......$85

Rib repair.................$150-$200.

Saddle mount install for scope.....$25.00

----custom mounts for LH dominant eye.....P.O.R.

Simmons vent rib........POR

Slug sight installation.......$70 (per sight, solder-on)

Straighten barrel.......$40-$60

Swivel set installation.......$30

Trigger job..........$65

Winchester 12, 2 3/4" conversion.........$85

 

 

 

“Adjust-A-Plate” install (plate extra)..$80.00

Bead install, front or center (bead extra)..$25

Bead removal if stuck.....$10.00-$20.00

Browning A-5,  2 3/4" conversion........$95.00

Buttpad install (standard).....$65.00

----Curved or Notched Buttplate..$75.00-$125

    Fit 1/4” Spacers  (per spacer).....$25.00

    Fit 1” Spacers (per spacer) No Pad work.$40

Cantilever mount install, touch-up blue.....

    $150.00 (includes parts)

    ---Remove old sights if necessary.....$15.00

Choke opening (per barrel).....$65.00 ($20

     extra for chrome bore)

Choke tube on single barrel 10ga.....$99.50.....

     ($20 extra for chrome bore)

    ---Spare choke tubes 10ga.....$24.99

Choke tube install - double barrel (includes 5

    tubes).....$475.00

Choke tube install on single barrel 12/20ga.....

     $79.50

Choke tube TRU-CHOKE package install

     (includes: Full, Mod, I.C. tubes and

     wrench.....$129.99

Choke tube removal....(usually ruins choke

     tube)(may ruin barrel).....$60.00

Clean, oil and test doubles..........$80-$100

Clean, oil and test pumps/autos.....$55-$75

Convert barrel to “Deerslayer” or “Buck

     Special”.....$60.00 plus sights

Convert to 3” magnum.....$90.00

Cowboy Action Job--Win 97’s.....$100.00

Cowboy Action Jobs--Doubles.....$80.00

Cut/Crown barrel and re-install bead....$50

Cut/Crown double barrel and re-install

     bead....$80

Dent removal (at customer’s risk)....$50-$70

Drill/Tap/Install Base on Receiver.....$65.00

Edwards recoil reducer install (labor only).$50

Forcing cone lengthening.....$55.00

Gold plate trigger on most shotguns.....$45.00

Gold fill receiver engraving on most shotguns

     with engraving.....$40.00

Jewel (engine turn) bolt and carrier on most

     shotguns.....$45.00

Left-hand safety install (most models) (price

     of safety extra).....$25.00 and up

Mercury reducer install..$65.00 (reducer extra)

Mount scope/bore-site on existing base..$25

Pattern Shotgun.....$50.00

Personal fitting to customers shotgun..$40.00

     ----Customer needs to come into store

     with shotgun and we will fit while you

     wait. Gun may have to stay longer if more

     work needs to be done.

Porting barrel.....Porting Page

Remington 1100/1187 Action tube repair/

     install (includes touch-up)...$60

Remington 1100/1187 Barrel stud install

     (includes touch-up)......$65

Remington 1100/1187 Install new int. latch

     stud (extra charge to remove)....$65

     ----remove damaged int. latch stud..$25

Remington 1100/1187 Mag tube resoldering

     (includes touch-up)....$80

Remington 1100/1187 New mag tube install

     (includes touch-up)....$110

Remington 1100/1187 Solder new barrel

     support......$80

Remington 870 Conversion to 3"........$90

Remington 870 Ejector Install......$60

Remington 58 Conversion of 870 barrel......$85

Rib repair.................$150-$200.

Saddle mount install for scope.....$25.00

    --custom mounts for LH dominant eye-POR

Simmons vent rib........POR

Slug sight installation.......$70

    --(per sight, solder-on)

Straighten barrel.......$40-$60

Swivel set installation.......$30

Trigger job..........$65

Winchester 12, 2 3/4" conversion.........$85

 

 

©AHLMAN'S GUNS • MORRISTOWN, MN

507-685-4243 / 507-685-4244